Radiator Support Replacement - GMC G Service Manual

2B-10 SHEET METAL
73. Bolt
74. Washer
75. Retainer
76. Cushion - Upper
77. Bracket
78. Cushion - Lower
79. Retainer
80. Nut
81. Radiator Support
4. Fender to side panel bolts (72 and 69) and nuts (68).
• Assemble loosely.
5. Fender to brace bolts (71).
H O Tighten
• All of the nuts and bolts to 17 N»m (13 ft. lbs.).
6. Parking lamp wiring to the fender.
• Clean excess sealant from the fender.
RADIATOR SUPPORT
REPLACEMENT
Remove or Disconnect (Figure
1. Radiator from the vehicle.
• Refer to RADIATOR (SEC. 6B2).
2. Air conditioning condenser from the vehicle.
• Refer to AIR CONDITIONING (SEC. 1B).
3. Battery.
• Refer to ENGINE ELECTRICAL (SEC. 6D).
4. Headlamp and parking lamp wires from the lamps.
5. Headlamp and parking lamp wiring harness from the
radiator support.
6. Headlamp bezels.
7. Headlamp assemblies.
8. Ground wires from the radiator support.
Figure 12 — - Radiator Support Mounting
9. Fuel vapor canister from the radiator support.
10. Air cleaner inlet from the radiator support.
11. Primary hood latch bracket to the radiator support
12. Grille from the vehicle.
13. Lower radiator grille panel from the vehicle.
14. Sheet metal support to radiator support bolts.
15. Sheet metal support from the vehicle.
16. Radiator support to fender bolts (119) (figure 8).
17. Wheelhouse panel to radiator support bolts (49)
18. Radiator support to frame nuts (80), lower retainers
12)
19. Radiator support from the vehicle.
[♦ ♦ j Install or Connect (Figure 12)
1. Radiator support to the vehicle.
2. Radiator support to frame washers (74), bolts (73),
bolts.
(figure 9).
(79), lower cushions (78), upper cushions (76),
retainers (75), bolts (73), and washers (74).
• Tilt the radiator support to the rear, and lift it up
and out of the vehicle.
• Lower the radiator support into the vehicle, and
tilt it into position.
retainers (75), upper cushions (76), lower cushions
(78), lower retainers (79), and frame nuts (80).
• Assemble loosely.
B-07280