Chapter 4 Commissioning - Powtran PI9000-S Series User Manual

Chapter 4 Commissioning

Correctly motor parameters
（ Set b0.00
Select appropriate ac/deceleration time
（ Set F0.13 、 F0.14 ）
Motor parameter self-learning
（ Set b0.27 ）

Firstly confirm that AC input power supply voltage shall be within inverter
rated input voltage range before connecting power supply to the inverter.

Connect AC power supply to the R, S and T input terminals of the inverter,
or solar power to the R, T input terminals of the inverter.

Select the appropriate operation control method.
0:Vector control W/O PG
b0 . 05 ）
Achieve the required control effect ？
Commissioning
Select control manner
（ Set F0.00 ）
F0.00=?
2 ： V/F control
Select command source
（ Set F0.11 ）
NO
YES
Commissioning
22
Select suitable frequency source
（ Set F0.03 ）
Select motor start-up mode
（ Set F3.00 ）
Select appropriate ac/deceleration time
（ Set F0.13 、 F0.14 ）
Select motor stop mode
（ Set F3.07 ）
Start motor to run,observe the
phenomenon,if abnormal,please
refer to the troubleshooting