Operation; Optional Accessories; Maintenance - Makita UT1305 Instruction Manual

OPERATION

Mixing
CAUTION:
Do not use to mix flammable material such as paint
•
with thinner used as solvent. Failure to do so may
cause injury.
Mixing with the mixing blade floating out of the
•
mixing material may cause the material to splash
about.
1. Hold the rear handle of the tool with one hand and
the grip with the other hand
mixing blade under material fully and turn on the
tool after making sure work site safety.
2. Move the mixing blade up and down during the
mixing operation so that whole part of material
can be mixed.
3. When finishing mixing, turn off the tool, make sure
that the mixing blade has come to a complete stop,
and then pull it out of the vessel.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before attempting to perform inspection
or maintenance.
Never use gasoline, benzine, thinner, alcohol or
•
the like. Discoloration, deformation or cracks may
result.
Replacing filter
Fig.7
Replace the filter regularly as the cooling efficiency of
the tool is reduced due to built-up dust or particles in
the filter.
Insert the slotted bit screwdriver and the like between
the tool and the cover as shown in the figure. Lift it up
just like using a shovel and remove the cover.
Replace the filter in the cover with a new one.
Reinstall the cover on the tool.
Replacing carbon brushes
Fig.8
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
Fig.9
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.

OPTIONAL ACCESSORIES

•
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
firmly, place the
•
•
NOTE:
•
5
CAUTION:
These accessories
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons.
attachment for its stated purpose.
Mixing blades
Shaft
Some items in the list may be included in the tool
package as standard accessories. They may differ
from country to country.
or attachments
Only use accessory or
are