Can-Am DS 250 Operator's Manual page 93

FUEL SYSTEM
Throttle Cable Adjustment
Slide rubber protector back to expose
throttle cable adjuster.
Loosen lock nut then turn the adjuster
to obtain correct throttle lever free play.
NOTE: Measure throttle free play at
the tip of throttle lever.
Tighten lock nut and reinstall protector.
vmo2006-014-052_a
1. Throttle lever
2. Protector
3. Cable adjuster
A. 1 to 3 mm (.039 to .118 in)
With the transmission lever on NEU-
TRAL position, start the engine. Check
if the throttle cable is adjusted correct-
ly by turning handlebar fully right then
fully left. If the engine RPM increases,
readjust the throttle lever free play.
_____________________
91