Engine; Air Filter - Can-Am DS 250 Operator's Manual

ENGINE

Air Filter

Air Filter Removal/Cleaning
NOTICE
Never remove or mod-
ify any component in the air filter
housing. The engine carburation
is calibrated to operate specifically
with these components. Otherwise,
engine performance degradation or
damage can occur.
Remove seat.
Release clamps and remove air filter
housing cover.
vmo2006-014-045_a
1. Air filter housing cover
Loosen clamp and remove retaining
screw, then remove air filter.
vmo2006-014-046_a
1. Clamp
2. Retaining screw
Pour cleaning solution (P/N 219 700
341) or an equivalent into a bucket.
Put the filter in to soak.
While filter soaks, clean inside the air
filter housing.
Rinse the filter with warm water until
all cleaning solution disappears.
NOTE: If the air filter foam is still dirty,
replace it with a new one.
Then, let the filter dry completely.
When the filter is dried, re-oiled with air
filter oil (P/N 219 700 340) or an equiva-
lent.
NOTICE
degradation or severe damages can
occur if the air filter is not properly
maintained and/or if it not well oiled.
Air Filter Installation
Properly reinstall removed parts in the
reverse order of their removal.
NOTE: Make sure that air filter hous-
ing cover is installed properly.
_____________________
Engine performance
79