Can-Am DS 250 Operator's Manual page 64

CONTROLS/INSTRUMENTS/EQUIPMENT
vmo2006-014-011_b
ENGINE STOP SWITCH FUNCTIONS
1. Engine stop switch
2. RUN position
3. OFF position
Engine Start Button
To start engine, place the engine stop
switch to RUN position.
Press and hold the engine start button,
release immediately after engine is
started.
vmo2006-014-011_e
TYPICAL
1. Engine start button
2. Engine stop switch
NOTE: The engine will not turn if the
engine stop switch is turned to OFF
position.
______________________
62
Override Button
This button is used to override the re-
verse speed limiter system while pow-
er backing up. Press and hold the over-
ride button then depress throttle lever
gradually.
WARNING
Never activate the override but-
ton if throttle lever is already de-
pressed as loss of control may re-
sult, causing severe personal in-
jury or death.
vmo2006-014-055_b
TYPICAL
1. Override button
Choke Lever
This device features a variable lever to
ease engine cold start.
Position OFF is for normal use with a
warm engine.