North Bridge Configuration; Memory Configuration - Supermicro M11SDV-4C-LN4F User Manual

Super M11SDV-4C/4CT/8C/8CT/8C+-LN4F User's Manual

North Bridge Configuration


Determinism Slider
Use this feature to select the performance determinism settings. The options are Auto, Power,
and Performance.
cTDP Control
Use this feature to set the TDP consumption. The options are Auto and Manual.
IOMMU
This feature allows the user to configure the I/O Memory Management Unit to enhance
memory mapping capabilities. The options are Disabled, Enabled, and Auto.
ACS Enable
This setting controls the ACS Enable feature. The options are Enable, Disabled, and Auto.
Memory Configuration
Memory Clock
Use this feature to select a different Memory Clock. The options are Auto, 1333MHz,
1600MHz, 1866MHz, 2133MHz, 2400MHz, and 2666MHz.
Memory Interleaving
Use this feature to control fabric level memory interleaving. If set to Channel, Die, or Socket,
there will be requirements on memory populations and will be ignored if the memory does
not support the selected option. The options are None, Channel, Die, Socket, and Auto.
Memory Interleaving Size
This feature controls the memory interleaving size. Select the appropriate value to determine
the starting address of the interleave. The options are 256 Bytes, 512 Bytes, 1 KB, 2 KB,
and Auto.
Chipselect Interleaving
Use this feature to interleave memory blocks across the DRAM chip selects for node 0.
The options are Disabled and Auto.
BankGroupSwap
The BankGroupSwap feature helps to determine how applications are attributed physical
locations. The options are Enabled, Disabled, and Auto.
70