Ruckus Wireless ZoneFlex Series Snmp Reference Manual page 68

DESCRIPTION
"Specifies WLAN security settings."
::= { ruckusWLANSecurityInfo 1 }
ruckusWLANSecurityEntry OBJECT-TYPE
SYNTAX RuckusWLANSecurityEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Specifies each WLAN security entry."
INDEX {
ifIndex }
::= { ruckusWLANSecurityTable 1 }
RuckusWLANSecurityEntry ::= SEQUENCE {
ruckusWLANSecurityMode
ruckusWLANSecurityAuthMode
ruckusWLANSecurityEncryMode
}
ruckusWLANSecurityMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
wep(2),
wpa(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the security mode.
if wep, table ruckusWLANWEPTable should be configured firstly;
if wpa + 'psk' auth,table ruckusWLANWPATable should be configured firstly;
if wpa + 'eap-802-1x' or 'auto' auth,firstly configure ruckusWLANAAAServerT-
able,then configure ruckusWLANWPATable."
DEFVAL { none }
::= { ruckusWLANSecurityEntry 5 }
ruckusWLANSecurityAuthMode OBJECT-TYPE
SYNTAX INTEGER {
Access Point WLAN MIBs
WLAN Security Information Group
INTEGER,
INTEGER,
INTEGER
68