Ruckus Wireless ZoneFlex Series Snmp Reference Manual page 26

-- ZF7761CM - 802.11n Dual-Band Outdoor AP with CableModem, 2 Ethernet ports,
16MB Flash, 32MB DRAM
ruckusZF7761CM OBJECT IDENTIFIER ::= { ruckusWirelessHotzoneProducts 7 }
ruckusZF7761CMControlLED OBJECT-TYPE
SYNTAX INTEGER {
ledPerCM(1),
ledPerAP(2),
ledAlternateMode1Mode2OneHour(3),
ledAlternateMode1Mode2Mode6(4),
blueActive(5),
blueActiveCMOnlineLed(6),
ledAllOff(7),
heartbeatOffCM(8),
heartbeatOffAP(9),
softResetAP(10),
powerCycleAP(11),
factoryResetAP(12),
softResetCM(13),
powerCycleCM(14),
factoryResetCM(15) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"ledPerCM(1):
ledPerAP(2):
ledAlternateMode1Mode2OneHour(3): Alternalte between modes 1 and 2 at a
30 second period then disabled after one hour,
ledAlternateMode1Mode2Mode6(4): Alternalte between modes 1 and 2 at a
30 second period and then go to mode 6
blueActive(5):
blueActiveCMOnlineLed(6):
Cable Modem online Green LED enabled,
ledAllOff(7):
heartbeatOffCM(8):
heartbeatOffAP(9):
softResetAP(10):
powerCycleAP(11):
factoryResetAP(12):
LEDs enabled per Cable Modem definition,
LEDs configured per Access Point definition,
Blue Active Surge Protection Indicator,
Blue Active Surge Protection Indicator and
All LEDs disabled,
Disable Cable Modem heartbeat monitoring,
Disable Access Point heartbeat monitoring,
Soft reset of Access Point,
Power cycle Access Point,
Reset Access Point to factory defaults,
Ruckus Product MIBs
Wireless Hotzone Products
26