ruckusDeviceWanIPV6PrefixLen INTEGER,
ruckusDeviceWanIPV6Gateway
ruckusDeviceWanIPAddrMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
static(2),
dhcp(3),
pppoe(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies how the wan gets its IP address.
none - bridging
static - Statically assigned IP address
dhcp - Using DHCP protocol
pppoe - Using PPPoE protocol
when ipaddr mode from dhcp to static,the relative nodes should be set together ,
including:ruckusDeviceWanIPAddr,ruckusDeviceWanNetmask,ruckusDeviceWanGat
eway
"
::= { ruckusDeviceWanEntry 1 }
ruckusDeviceWanIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is writable only if the ruckusDeviceWanIPAddrMode
is set to static(2)."
::= { ruckusDeviceWanEntry 2 }
ruckusDeviceWanName OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
OCTET STRING }
Access Point Device MIBs
Device WAN Configuration
120