Ruckus Wireless ZoneFlex Series Snmp Reference Manual page 144

"Specifies PPPoE user name. But it will not be effective unless you set apply(1)
to ruckusPPPOEApply."
::= { ruckusPPPOEInfo 1 }
ruckusPPPOEPassword OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (1..64))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies PPPoE password. But it will not be effective unless you set apply(1) to
ruckusPPPOEApply."
::= { ruckusPPPOEInfo 2 }
ruckusPPPOEConnectionStatus OBJECT-TYPE
SYNTAX INTEGER {
connected(1),
notConnected(2) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies PPPoE connection status. Return up(1) if connection is
up, down(2) if connection is down, disabled(3) if PPPoE is disabled."
::= { ruckusPPPOEInfo 3 }
ruckusPPPOEConnection OBJECT-TYPE
SYNTAX INTEGER {
connect(1),
disConnect(2),
ok(3) ,
disabled(4)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Set connect(1) to connect or re-connect and disConnect(2)
to PPPoE server. On read, return enabled(3) if PPPoE is enabled, or
disabled(4) if PPPoE is disabled."
::= { ruckusPPPOEInfo 4 }
Access Point PPPoE MIBs
PPPoE Information
144