Ruckus Wireless ZoneFlex Series Snmp Reference Manual page 45

Access Point WLAN MIBs
WLAN Table
45
DESCRIPTION
"Specifies if the WDS is enabled or disabled on this interface.
Allow 4 address mode of operation for an given WLAN interface."
DEFVAL { false }
::= { ruckusWLANEntry 11 }
ruckusWLANAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Administrative status of the WLAN interface."
::= { ruckusWLANEntry 12 }
ruckusWLANProtectionMode OBJECT-TYPE
SYNTAX INTEGER {
none(1),
ctsOnly(2),
ctsRts(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Enabled when 11g and 11b clients exist on the same network.
none:
Do not use any protection
ctsOnly:
AP will send a CTS frame prior to sending 11g frames.
The CTS frame will silence 11b clients
rtsCts:
Require RTS to be sent by sender of 11g frame and responder
to send CTS prior to any 11g frames being sent."
::= { ruckusWLANEntry 13 }
ruckusWLANName OBJECT-TYPE