Ruckus Wireless ZoneFlex Series Snmp Reference Manual page 122

static(2)}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies how the wan gets its IPV6 address.
auto-configuration
static - Statically assigned IPV6 address
when ipv6addr mode from auto-configuration to static,the relative nodes should
be set together ,
including:ruckusDeviceWanIPV6Addr,ruckusDeviceWanIPV6PrefixLen,ruckusDevice
WanIPV6Gateway "
DEFVAL {auto-configuration}
::= { ruckusDeviceWanEntry 10 }
ruckusDeviceWanIPV6Addr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..40))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This is writable only if the ruckusDeviceWanIPAddrMode
is set to static(2)."
::= { ruckusDeviceWanEntry 11 }
ruckusDeviceWanIPV6PrefixLen OBJECT-TYPE
SYNTAX INTEGER (3..128)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the ip v6 address prefix length if the ruckusDeviceWanIPV6AddrMode
is set to static(2)."
::= { ruckusDeviceWanEntry 12 }
ruckusDeviceWanIPV6Gateway OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (2..40))
MAX-ACCESS read-write
- auto get ipv6 address by RFC about IPV6
Access Point Device MIBs
Device WAN Configuration
122