Ruckus Wireless ZoneFlex Series Snmp Reference Manual page 121

Access Point Device MIBs
Device WAN Configuration
121
STATUS current
DESCRIPTION
"Specifies the name of the wan interface."
::= { ruckusDeviceWanEntry 3 }
ruckusDeviceWanNetmask OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the ip address mask if the ruckusDeviceWanIPAddrMode
is set to static(2)."
::= { ruckusDeviceWanEntry 4 }
ruckusDeviceWanGateway OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the gateway ipaddr if the ruckusDeviceWanIPAddrMode
is set to static(2)."
::= { ruckusDeviceWanEntry 5 }
ruckusDeviceWanIPVersion OBJECT-TYPE
SYNTAX INTEGER { ipv4(1), ipv6(2),dualstack(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specifies the system ip version,ipv4 or ipv6 or dualstack.
ipv4 - only support IPV4
ipv6 - only support IPV6
dualstack - support IPV4 and IPV6"
DEFVAL {ipv6}
::= { ruckusDeviceWanEntry 8 }
ruckusDeviceWanIPV6AddrMode OBJECT-TYPE
SYNTAX INTEGER {