Receiver Socket Assignment - GRAUPNER MX-16S Programming Manual

Receiver socket assignment for models of the "Delta / Flying wing" type, with up to two fl aps
WARNING
Do not shorten the aerial!
Y-lead, Order No.
3936.11 or 3936.32
Switch harness
Receiver aerial
PLL-Synthesizer-MICRO-SUPERHET
Receiver
battery
30 Fixed-wing models – Installation and connections
7
Best.-Nr.
7052
6
5
Kanal 60-282/182-191
R 1 6
4
S C A N
FM
! #
3
für das 35MHz/35MHz-B-Band
2
Made in Malaysia 1
As there are several possible combinations of servo ori-
entation and control surface linkage, you may fi nd that
the direction of rotation of one or more servos is incor-
rect. Use the following table to solve the problem.
8 = Auxiliary function
Model
7 = Right fl ap / reserve
V-tail
6 = Left fl ap / reserve
5 = Reserve
4 = Rudder
Delta,
fl ying wing
3 = Right elevon
2 = Left elevon
1 = Throttle / brake
All menus which are relevant to fi xed-wing models are
marked with an "aeroplane" symbol in the "Program de-
scriptions":
This means that you can easily skip irrelevant menus
when programming a fi xed-wing model aircraft.
Servo rotating
Remedy
type in wrong
direction
Rudder and elevator Reverse servos 3 + 4 in
reversed the »Servo settings«
menu
Rudder correct, Swap over servos 3 + 4
elevator reversed at the receiver
Elevator correct Reverse servos 3 + 4 in
rudder reversed the »Servo settings«
menu, and swap over at
the receiver
Elevator and ailerons Reverse servos 2 + 3 in
reversed the »Servo settings«
menu
Elevator correct, Reverse servos 2 + 3 in
ailerons reversed the »Servo settings«
menu, and swap over at
the receiver
Ailerons correct, Swap over servos 2 + 3
elevator reversed at the receiver