Control Transformer T2 (0558007188) - ESAB Powercut 1600 Service Manual

SECTION 4 DESCRIPTION Of OPERATION
4.2

Control Transformer T2 (0558007188)

The auxiliary control transformer is used to step-down the input voltage to levels that can be used as sup-
ply voltages for the logic circuits in the PC1600. Since the PowerCut 1600 is available in with different input
voltage configurations, the control transformer has a multiple tap primary to allow it to be used in all ver-
sions. T2 supplies the following AC voltages to the bias supply circuits on the Power Board PCB3:
4.2
230 V / 460 V Configuration 575 V Configuration
400 V / 400 V CE Configuration
25