User Interface; External Control Panel - ESAB Rogue EM 180 Instruction Manual

6 USER INTERFACE
6

USER INTERFACE

General safety regulations for handling the equipment can be found in the "SAFETY" chapter
of this manual. Read it through before you start using the equipment!
General information about operation can be found in the "OPERATION" chapter of this manual.
Read it through before you start using the equipment!
6.1

External control panel

1. Encoder knob 1 - Adjusts voltage and selects
weld variables
2. Encoder knob 2 - Adjusts wire feed speed and
selects weld variables
3. Push button 2 - Selects arc dynamics and
trigger mode
4. Right-hand display - Displays material
thickness or preset wire feed speed, trigger
mode, arc dynamics value, and weld variable
values
5. Arc Dynamics LED - Illuminates when feature
is selected
6. Trigger mode LED - Illuminates when feature is
selected
7. Over temperature indication
0447 979 001
8. Spool gun LED - Illuminates when the spool
gun trigger leads are connected
9. MIG LED - Illuminates when the process has
been selected
10. MIG Synergic LED - Illuminates when the
process has been selected. Used in
conjunction with Synergic control panel
11. MMA LED - Illuminates when the process has
been selected
12. Left-hand display - Displays preset voltage and
various weld variables
13. Push button 1 - Selects various weld variables
- 22 - © ESAB AB 2023