Replacement Parts; General; Ordering - ESAB Powercut 1600 Service Manual

SECTION 6
6.0

REPlACEMENT PARTS

6.1

general

Always provide the serial number of the unit on which the parts will be used. The serial number is
stamped on the unit nameplate.
6.2

Ordering

To ensure proper operation, it is recommended that only genuine ESAB parts and products be used
with this equipment. The use of non-ESAB parts may void your warranty.
Replacement parts may be ordered from your ESAB Distributor.
Be sure to indicate any special shipping instructions when ordering replacement parts.
Refer to the Communications Guide located on the back page of this manual for a list of customer ser-
vice phone numbers.
Bill of material items that have blank part numbers are provided for customer information
only. Hardware items should be available through local sources.
REPlACEMENT PARTS
NOTE
131
6.0