User Interface; External Control Panel - ESAB ROGUE EM 140 Instruction Manual

6 USER INTERFACE
6

USER INTERFACE

General safety regulations for handling the equipment can be found in the "SAFETY
PRECAUTIONS" chapter of this manual. General information about operation can be found in
he "OPERATION" chapter of this manual. Read both chapters thoroughly before you start
using the equipment.
6.1

External control panel

1. Encoder knob 1 (adjusts voltage and select
weld variables)
2. Encoder knob 2 (adjusts wire feed speed and
arc dynamics value)
3. Push button (select arc dynamics and trigger
mode)
4. Right-hand display (displays preset wire feed
speed, trigger mode, arc dynamics- , and weld
variable values)
5. Arc dynamics LED (illuminates when feature is
selected)
6. Trigger mode LED (illuminates when feature is
selected)
0447 955 001
7. Over temperature indication
8. Push button (select various weld variables,
and weld variables)
9. Left-hand display (displays preset voltage)
10. MIG LED (illuminates as default)
11. Spool gun LED (illuminates when the spool
gun trigger leads are connected)
- 24 - © ESAB AB 2023