Program Changes - ESAB Powercut 1600 Service Manual

SECTION 9
9.0
9.1

Program Changes

Program changes:
Program Rev #
1 OR
1.01 A
1.02 B
1.03 C
1.04 D
Date Change
7-Dec-07 Original Release
11-Jul-08 Requirement for ability to program amperage
level setting of machine via the power pcb at machine factory final test.
18-Aug-08 Corrected "Machine randomly fails to error condition 13
if power is applied to machine prior to shop air being supplied to machine.
9-Oct-08 Desire machine ability to reset after error condition 15
Limit maximum air pressure to 95 psi.
18-Nov-08 Mechanized Arc On operation needed to be enabled
163
Program Changes