Group Acl - Asus SL6000 Setup Instructions

Solwise Asus SL6000 ADSL Ethernet Router User's Guide
7.4.3

Group ACL

Usage Guidelines:
With this option you can configure access rules for user-groups. With this option you can allow
users belonging to different groups to access different services at any desired time-frame. For
instance you can configure user1 belonging to group1 to have access to services like
NetMeeting during morning and configure user2 of group2 to deny access to ICQ chat during
office hours. This user login is quite different from administrator's login to Broadband Gateway.
Prior to configuring the access rule for user groups , you should have:
•
Created a user group
•
Created a user within that group
To add a new user groups access rule, choose the Add New option in the drop down list, select
the action as either Allow or Deny. Choose the Rule Type that you'd like to add from the drop
down list. Select the user group from the drop down list. Choose the Source IP from the drop
down list, from where you'd like to allow the traffic. Choose the Destination IP from the drop
down list, to where you'd like to allow the traffic. Choose the Source Port from the drop down
list, from where you'd like to allow the traffic. Choose the Destination Port from the drop down
list, to where you'd like to allow the traffic. Select the protocol of traffic. If you'd like to allow the
traffic using NAT, select the NAT Pool name or the NAT IP address. If you'd like to allow the
traffic during any specific time choose the Time range option. You can associate any
Application Filter by selecting the filters from the drop down list. You can enable log and VPN
for this Rule. You can set the priority of the rule by making the rule first or second depending on
your wish. Finally click on the Apply button. To view the existing or the configured rules, choose
the rule id from the drop down list. To delete an existing rule, choose the rule id in the drop
Chapter 7. The Configuration Pages in more detail
83