Modify Vpn Rules; Delete Vpn Rules; Display Vpn Rules - Asus SL6000 Setup Instructions

Chapter 6. Configuring VPN
6.2.3

Modify VPN Rules

6.2.4

Delete VPN Rules

6.2.5

Display VPN Rules

60
Solwise Asus SL6000 ADSL Ethernet Router User's Guide
allow-ike-io, which is needed by IKE. Higher priority rules will be
examined prior to the lower priority rules by the VPN.
8. Click on the Add button to create the new VPN rule. The new
VPN rule will then be displayed in the VPN Connection Status table
at the lower half of the VPN Configuration page.
To modify a VPN rule, follow the instructions below:
1. Log into Configuration Manager as admin, click the VPN menu,
and then click submenu.
Tunnel
2. Prior to modifying a VPN rule, make sure that the VPN service is
enabled in System Service Configuration page.
3. Select the rule number from the "ID" drop-down list or click on the
icon of the rule to be modified in the VPN Connection Status table.
4. Click on "Enable" or "Disable" radio button to enable or disable
this rule.
5. Make changes to any or all of the following fields: local/remote
secure group, remote gateway, key management type (select
Preshared Key), pre-shared key for IKE, encryption/authentication
algorithm for IKE, lifetime for IKE, encryption/authentication
algorithm for IPSec, operation mode for IPSec, PFS group for
IPSec and lifetime for IPSec. Please see table above for
explanation of these fields.
6. Click on the Modify button to modify this VPN rule. The new
settings for this VPN rule will then be displayed in the VPN
Connection Status table at the lower half of the VPN Configuration
page.
To delete a VPN rule, follow the instructions below:
1. Log into Configuration Manager as admin, click the VPN menu,
and then click submenu.
Tunnel
2. Prior to deleting a VPN rule, make sure that the VPN service is
enabled in System Service Configuration page.
3. Select the rule number from the "ID" drop-down list or click on the
icon of the rule to be modified in the VPN Connection Status table.
4. Click on the Delete button to delete this VPN rule. Note that the
VPN rule deleted will be removed from the VPN Connection Status
table located at the lower half of the same configuration page.
To see existing VPN rules, follow the instructions below:
1. Log into Configuration Manager as admin, click the VPN menu,
and then click submenu.
Tunnel
2. The VPN rule table located at the lower half of the VPN
Configuration page shows all the configured VPN rules.