Configuring Port Forwarding - Asus SL6000 Setup Instructions

Solwise Asus SL6000 ADSL Ethernet Router User's Guide
4.5

Configuring Port Forwarding

Now, internet access should work! If it doesn't work then check on
the WAN ADSL screen that it shows you are connected. If not then
this says it can't find the ADSL signal on the line. Next goto the
WAN//Channel page and make sure it shows an IP address for the
link: Address 0.0.0.0 is NOT correct. If there is no address shown
then this means it's not logging in with the ISP. Check your user
name and password. Finally check that your PC is running with
correct IP, Default gateway and DNS addresses.
Goto Firewall/Inbound ACL...
Create a rule which specifies the source and destination ports and
also the IP address of the system you want the traffic forwarded to.
For example, if you wanted to forward port 80 (http) to a local client
at address 192.168.0.49 then...
Chapter 4. PPPoA Router configuration (For the UK)
39