Modify Inbound Acl Rules; Delete Inbound Acl Rules - Asus SL6000 Setup Instructions

Solwise Asus SL6000 ADSL Ethernet Router User's Guide
5.3.3

Modify Inbound ACL Rules

5.3.4

Delete Inbound ACL Rules

5. Assign a priority for this rule by selecting a number from the
"Move to" drop-down list. Note that the number indicates the priority
of the rule with 1 being the highest. Higher priority rules will be
examined prior to the lower priority rules by the firewall.
6. Click on the Add button to create the new ACL rule. The new
ACL rule will then be displayed in the inbound access control list
table at the lower half of the Inbound ACL Configuration page.
Figure 8.2 illustrates how to create a rule to allow inbound HTTP
(i.e. web server) service. This rule allows inbound HTTP traffic to be
To modify an inbound ACL rule, follow the instructions below:
1. Log into Configuration Manager as admin, click the Firewall
menu, and then click
Inbound ACL
2. Select the rule number from the "ID" drop-down list or click on the
icon of the rule to be modified in the inbound ACL table.
3. Make desired changes to any or all of the following fields: action,
source/destination IP, source/destination port, protocol, port
mapping, log, and VPN. Please see Table 8.1 for explanation of
these fields.
4. Click on the Modify button to modify this ACL rule. The new
settings for this ACL rule will then be displayed in the inbound
access control list table at the lower half of the Inbound ACL
Configuration page.
To delete an inbound ACL rule, follow the instructions below:
1. Log into Configuration Manager as admin, click the Firewall
menu, and then click
Inbound ACL
2. Select the rule number from the "ID" drop-down list or click on the
icon of the rule to be deleted in the inbound ACL table.
Chapter 5. Configuring Firewall/NAT Settings
submenu.
submenu.
45