Modify Outbound Acl Rules; Delete Outbound Acl Rules - Asus SL6000 Setup Instructions

Solwise Asus SL6000 ADSL Ethernet Router User's Guide
5.4.3

Modify Outbound ACL Rules

5.4.4

Delete Outbound ACL Rules

6. Click on the Add button to create the new ACL rule. The new
ACL rule will then be displayed in the outbound access control list
table at the lower half of the Outbound ACL Configuration page.
Figure above illustrates how to create a rule to allow outbound
HTTP traffic. This rule allows outbound HTTP traffic to be directed
to any host on the external network for a host in your LAN w/ IP
address 192.168.1.15.
To modify an outbound ACL rule, follow the instructions below:
1. Log into Configuration Manager as admin, click the Firewall
menu, and then click
Outbound ACL
2. Select the rule number from the "ID" drop-down list or click on the
icon of the rule to be modified in the outbound ACL table.
3. Make desired changes to any or all of the following fields: action,
source/destination IP, source/destination port, protocol, port
mapping, log, and VPN. Please see Table above for explanation of
these fields.
4. Click on the Modify button to modify this ACL rule. The new
settings for this ACL rule will then be displayed in the outbound
access control list table at the lower half of the Outbound ACL
Configuration page.
To delete an outbound ACL rule, follow the instructions below:
1. Log into Configuration Manager as admin, click the Firewall
menu, and then click
Outbound ACL
2. Select the rule number from the "ID" drop-down list or click on the
icon of the rule to be deleted in the outbound ACL table.
3. Click on the Delete button to delete this ACL rule. Note that the
ACL rule deleted will be removed from the ACL rule table located at
the lower half of the same configuration page.
Chapter 5. Configuring Firewall/NAT Settings
submenu.
submenu.
49