Asus SL6000 Setup Instructions page 96

Chapter 7. The Configuration Pages in more detail
Gateway creates dynamic policies by:
Activating all the rules configured for the group
Replacing the source IP address in the rule with IP address of the machine from which the
user logged in.
Broadband Gateway stores them in a dynamic rule list and uses them for every connection from the
user. It deletes this list after the user logs out of the System's firewall.
To add a new User, you've to add a User-group first. Choose the Add New option in the drop
down list, enter the User Group Name in the text box. Choose the Add New option in the
drop down list, enter the User Name in the text box. Enter the Password that you'd like the
user to have. Make sure that the Password entered is at least of 8 characters in length and it's
alpha-numeric. Type the same Password in Confirm Password textbox. Enter the Inactivity
timeout value that you'd like to set. Finally click on the Apply button to make the changes
effective. To view the existing or the configured Users, choose the User name in the drop
down list. To delete an existing User or User group, choose the User name or the User group
in the drop down list and click on the Delete User or Delete User group button.
User Group Name: Type the User group name that you would like to add.
User Name: Type the User name that you would like to add.
Password: Type the User's password.
Confirm Password: Type the User's password again for confirmation.
Inactivity Timeout: Type the timeout period, which is used to delete the User related
associations whenever there is no traffic across this connection.
96
Solwise Asus SL6000 ADSL Ethernet Router User's Guide