Add A Rule For Vpn Connection Using Pre-Shared Key - Asus SL6000 Setup Instructions

Hide thumbs Also See for SL6000:
Table of Contents

Advertisement

Chapter 6. Configuring VPN
Encryption / Authentication
Operation Mode
PFS Group
Life Times
6.2.2

Add a Rule for VPN Connection Using Pre-shared Key

58
Solwise Asus SL6000 ADSL Ethernet Router User's Guide
Select one of the following pre-configured IKE
proposals from the drop-down list. If "All" is
selected, all the pre-configured proposals will be
associated with existing tunnel and one (among
the set of IPSec proposals) will be selected
automatically and used by IPSec to communicate
with its peer.
All
Strong Encryption & Authentication (ESP 3DES
HMAC SHA1)
Strong Encryption & Authentication (ESP 3DES
HMAC MD5)
Encryption & Authentication (ESP DES HMAC
SHA1)
Encryption & Authentication (ESP DES HMAC
MD5)
Authentication (AH SHA1)
Authentication (AH MD5)
Strong Encryption (ESP 3DES)
Encryption (ESP DES)
Authentication (ESP SHA1)
Authentication (ESP MD5)
Select one of the following Perfect Forward
Secrecy Defiie-Hellman Group from the drop-down
list.
NO PFS (default)
DH-1
DH-2
DH-5
Note: Using PFS, keys will be changed during the
course of a connection and make the tunnel more
secure. However, enabling this option slows down
the data transfer.
Enter the life time of IPSec security association in
seconds, minutes, hours or days and kilo bytes.
Default value is 3600 seconds and 75000 kilo
bytes.
VPN Tunnel Configuration Page, as illustrated below, is used to
configure a rule for VPN connection using pre-shared key.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents