Firewall; Inbound Acl - Asus SL6000 Setup Instructions

Solwise Asus SL6000 ADSL Ethernet Router User's Guide
select it from the drop down list and click on the Delete button. To modify a specific static
routing entry, select the entry from the drop down list, modify the Destination IP Address,
Destination Netmask and/or Gateway IP Address settings and then click on the Modify
button.
7.4

Firewall

7.4.1

Inbound ACL

Usage Guidelines
With this option you can configure the access rules for allowing the public machines to access
the services, hosted in your local network. To add a new access rule, choose the Add New
option in the drop down list, select the action as either Allow or Deny. Choose the Source IP
from the drop down list, from where you would like to allow the traffic. Choose the Destination
IP from the drop down list, to where you would like to allow the traffic. Choose the Source Port
from the drop down list, from where you would like to allow the traffic. Choose the Destination
Port from the drop down list, to where you would like to allow the traffic. Select the protocol of
traffic. If you would like to allow the traffic using NAT, select the NAT Pool name or the IP
address from the drop down list and enter IP address. If you would like to allow the traffic during
any specific time choose the Time range option. You can associate any Application Filter by
selecting the filters from the drop down list. You can enable log and VPN for this Rule. You can
set the priority of the rule by making the rule first or second depending on your wish. Finally
click on the Add/Modify button. To view the existing or the configured rules, choose the rule id
Chapter 7. The Configuration Pages in more detail
77