Display Inbound Acl Rules; Configuring Outbound Acl Rules; Options In Outbound Acl Configuration Page - Asus SL6000 Setup Instructions

Chapter 5. Configuring Firewall/NAT Settings
5.3.5

Display Inbound ACL Rules

5.4

Configuring Outbound ACL Rules

5.4.1

Options in Outbound ACL Configuration Page

The Table below describes the options available for an outbound ACL rule.
Option
ID
Add New
Rule Number
46
Solwise Asus SL6000 ADSL Ethernet Router User's Guide
3. Click on the Delete button to delete this ACL rule. Note that the
ACL rule deleted will be removed from the ACL rule table located at
the lower half of the same configuration page.
To see existing inbound ACL rules, follow the instructions below:
1. Log into Configuration Manager as admin, click the Firewall
menu, and then click
Inbound ACL
2. The inbound ACL rule table located at the lower half of the
Inbound ACL Configuration page shows all the configured inbound
ACL rules.
By creating ACL rules in outbound ACL configuration page as
shown in Figure 8.3, you can control (allow or deny) Internet or
external network access for computers on your LAN.
Options in this configuration page allow you to:
Add a rule, and set parameters for it
Modify an existing rule
Delete an existing rule
View configured ACL rules
Purpose
Click on this option to add a new 'basic' Firewall
rule.
Select a rule from the drop-down list, to modify its
attributes.
submenu.