Modify Vpn Rules; Delete Vpn Rules - Asus SL1200 User Manual

10.3.2 Modify VPN Rules

To modify a VPN rule
1. Log into Configuration Manager as administrator. Click VPN -> VPN
Tunnel.
2. Prior to modifying a VPN rule, make sure that the VPN service is
enabled in System Service Configuration page.
3. Select the rule number from the ID drop-down list or click on the icon of
the rule to be modified in the VPN Connection Status table.
4. Click on Enable or Disable radio button to enable or disable this rule.
5. Make changes to any or all of the following fields: local/remote secure
group, remote gateway, key management type (select Preshared
Key), pre-shared key for IKE, encryption/authentication algorithm for
IKE, lifetime for IKE, encryption/authentication algorithm for IPSec,
operation mode for IPSec, PFS group for IPSec and lifetime for IPSec.
Please see Table 10.4 for explanation of these fields.
6. Click on <Modify> to modify this VPN rule. The new settings for this
VPN rule will then be displayed in the VPN Connection Status table at
the bottom half of the VPN Configuration page.

10.3.3 Delete VPN Rules

To delete an outbound ACL rule
1. Log into Configuration Manager as administrator. Click VPN -> VPN
Tunnel.
2. Prior to deleting a VPN rule, make sure that the VPN service is enabled
in System Service Configuration page.
3. Select the rule number from the ID drop-down list or click on the
of the rule to be modified in the VPN Connection Status table.
4. Click on <Delete> to delete this VPN rule. The VPN rule deleted will be
removed from the VPN Connection Status table located at the bottom half
of the same configuration page.
Chapter 10 - Configuring VPN
ASUS SL1200
icon
113