Download Print this page

Asus GX-D1051 Quick Start Manual

10/100/1000mbps gigabit ethernet switch
Hide thumbs

Advertisement

QE4028
GX-D1051
GX-D1081
10/100/1000Mbps Gigabit Ethernet Switch

Quick Start Guide

Copyright © 2008 ASUSTeK COMPUTER INC. All Rights Reserved.

Advertisement

loading

  Related Manuals for Asus GX-D1051

  Summary of Contents for Asus GX-D1051

  • Page 1: Quick Start Guide

    QE4028 GX-D1051 GX-D1081 10/100/1000Mbps Gigabit Ethernet Switch Quick Start Guide Copyright © 2008 ASUSTeK COMPUTER INC. All Rights Reserved.
  • Page 2: Package Contents

    Full wire speed reception and transmission • Jumbo frame up to 12KB for GX-D1051 and 16KB for GX-D1081 • 1K for GX-D1051 and 4K for GX-D1081 MAC address with automatic address learning and aging • Fanless design for quiet operation • IEEE 802.3x flow control in full duplex mode, back pressure in half duplex...
  • Page 3: Technical Specifications

    8 RJ-45 10/100/1000Mbps Gigabit Ethernet ports for GX-D1081 Protocol IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3ab 1000Base-T IEEE 802.3x Full duplex flow control Jumbo frame support: 12KB for GX-D1051, 16KB for GX-D1081 Performance Bandwidth: 10Gbps for GX-D1051, 16Gbps for GX-D1081 Forward rate: 14,800 packets/sec. (10Mbps), 148,000 packets/sec. (100Mbps), 1,488,000 packets/sec.
  • Page 4: Front Panel

    Hardware Front panel The front panel of GX-D1051 / GX-D1081 includes LED indicators that show realtime status of the switch. GX-D1051 front panel GX-D1081 front panel LED indicators Color Status Description Green The switch is ON. POWER The switch is OFF.
  • Page 5: Rear Panel

    Rear panel The rear panel of GX-D1051 / GX-D1081 includes Gigabit Ethernet ports and the DC IN input port. DC 12V GX-D1051 rear panel DC 12V GX-D1081 rear panel Quick Start Guide...
  • Page 6: Placement Options

    Placement options • DO NOT place any device on top of the switch. • Leave enough space around the switch for adequate ventilation. Ensure that the switch is placed in a location that meets the environmental specifications. See page 3 for details. Desktop placement Put the switch on a flat and stable surface. Wall mounting Mount the switch on a wall with the supplied mounting screws.
  • Page 7: Connecting To Network Devices

    The length of the network cables should not exceed 100 meters (328 feet). Connecting to end nodes The GX-D1051 / GX-D1081 Switch is used as a standalone switch to connect end nodes such as PCs and printers and form a small workgroup. With auto MDI/MDIX...
  • Page 8 Quick Start Guide...

This manual is also suitable for:

Gx-d1081