Table of Contents
Advertisement
6. Optical parts and servicing procedures
Image 6-7
Lamp: removing
6.1.5
Installing the lamp
Necessary tools
No tools.
How to install the lamp?
1. Make sure the lamp locking system is open
Image 6-9
Lens locking system: open
2. Slide the lamp in its slot while keeping the locking system opened
Tip:
The lamp can only be locked in one position: make sure the lamp is orientated in such a way that the power connector
is located close to the front side of the projector!
Image 6-11
Lamp: inserting
3. When the lamp is at its end position, release the locking system
4. Firmly push the bottom side of the lamp until it is locked ('click' sound)
28
Image 6-8
Lamp: removed
Image 6-10
Lens locking system: closed
R59770119 SIM 7C 28/05/2008
Advertisement
Table of Contents
