Table of Contents
Advertisement
7.2.4
Mounting the top filter
Necessary tools
Torx screwdriver T10
How to mount the top filter?
1. Put the filter in its housing
Note: The seal of the filter must point down!
2. Put the top filter cover in the right position
Image 7-14
Top filter: put the cover in the right position
3. Tighten the four screws to fix the top filter cover
Image 7-15
Top filter cover: fixation screws
7.3
Cleaning the projector lens
How to clean the projector lens?
See the manual that was delivered with the projector lens.
7.4
Cleaning the optical path
How to clean the optical path?
The cleaning of the optical path can only be done by an authorized Barco engineer.
R59770119 SIM 7C 28/05/2008
7. Maintenance procedures
37
Advertisement
Table of Contents
