Barco SIM 7C R9011206 Service Manual page 27

Image 5-5
Upgrading the projector (2)
9. If the downloaded upgrade tool is a newer version than the installed software version, hit Yes
10.The progression details of the upgrade can be seen in the window
Image 5-6
Upgrading the projector (3)
Caution: Do not switch off the projector or the computer during the upgrade procedure!
Note: In case of problems during the upgrade procedure, the following two buttons can be used for diagnostics:
Save text will save the text inside the Barco Networked Projector Upgrade Tool in a file
Screen shot will save a screen shot of the projected image at that particular time.
11. When the upgrade is successful, a green ellipse appears at the bottom of the window and an information window pops up
Image 5-7
Upgrading the projector (4)
12.Hit OK to finish the upgrade
R59770119 SIM 7C 28/05/2008
5. Projector software (firmware)
23