Installing The Lamp Door - Barco SIM 7C R9011206 Service Manual

Image 6-12
Lamp inserting: firmly push the bottom side first
5. Then firmly push the top side of the lamp, while pushing the lamp locking handle down
Image 6-13
Lamp inserting: firmly push the top side...
6.1.6

Installing the lamp door

Necessary tools
Torx screwdriver T10
How to install the lamp door?
1. Put the lamp door in the right position
Tip: The two positioning points must coincide with the two positioning holes
Image 6-15
Lamp door: positioning points & holes
2. Tighten the three screws
R59770119 SIM 7C 28/05/2008
6. Optical parts and servicing procedures
Image 6-14
Lamp inserting: ... while pushing down the lamp locking handle
Image 6-16
Lamp door: positioning holes
29