Intended Use; Use And Operation Solely With The Following Machines; Applications - EWM Taurus 351 Operating Instructions Manual

Intended use

Use and operation solely with the following machines

3 Intended use
Hazards due to improper usage!
Hazards may arise for persons, animals and material objects if the equipment is not
used correctly. No liability is accepted for any damages arising from improper usage!
• The equipment must only be used in line with proper usage and by trained or expert staff!
• Do not modify or convert the equipment improperly!
Arc welding machine for standard and pulsed gas-shielded metal-arc welding with TIG welding and lift arc
(touch starting) or MMA welding as secondary process. It may be possible to expand the functionality by
using accessories (see the documentation in the relevant chapter).
3.1 Use and operation solely with the following machines
A suitable power source (system component) is required in order to operate the wire feed unit!
drive 4X (LP/HP/MMA)
drive 4X IC (LP/HP/MMA)
Taurus Synergic S drive 200C
Taurus Synergic S drive 300C
Taurus Synergic S drive 4L
Taurus Synergic S drive 4
3.2

Applications

Machine series
alpha Q MM
Phoenix MM
Taurus S MM
 possible
 not possible
14
WARNING
Taurus 351, 401, 451, 551 Synergic S MM FDG/FDW
Main process
Standard MIG/MAG welding
  
  
  






Pulsed MIG/MAG
welding
  
  
  
Secondary
process
   
   
   
099-005341-EW501
27.01.2016