Connecting A Fs-100 To A Dv/Hd Camcorder - Focus FS-100 User Manual

Connecting a FS-100 to a DV/HD Camcorder

Before performing this procedure, make sure you have installed and
charged the battery, see
22.
1. Connect the supplied Firewire cable to the
the top of the FS-100.
2. Locate the FireWire/DV/iLink (or similar) connector on your
video camera. It is located in different places depending upon
the brand of camera. If you are unclear of its location, consult
your video camera manual.
FS-100 Supplied with 4-pin to 6-pin FireWire Cable
A 4-pin to 6-pin FireWire, 1394, cable is provided with the
FS-100.
HVX200 FireWire Connector
The FireWire connector on the HVX200 is located on the right side of the
camera, behind the tape transport. For more information, refer to the
HVX200 documentation.
3. Connect the other end of the FireWire, 1394, cable to your
video camera.
4. Turn on the video camera.
5. Turn on the FS-100.
Installing / Removing the Battery Pack
FS-100 Portable DTE Recorder
Quickstart
on page
connector on
DV I/O
25