Setting Up Master And Slave Fs-100 - Focus FS-100 User Manual

Setting Up Master and Slave FS-100

Master FS-100
2
STOP 1 - 001
COUNTER
00 : 00 : 00 : 00
1. Connect the camcorder to the master FS-100,
connector using the supplied FireWire cable.
2.
Master
Power on unit.
Go to the
USE EXT FS-100
3. Connect the FS-100s through the units
connectors using a 6-pin to 6-pin FireWire cable.
4.
Slave
Power on the unit
Go to the
5.
Master
Begin recording or playback using the master FS-100.
Use DD Drive Mode when Connecting to a PC
It is important to take the master FS-100 out of USE EXT FS-100
mode before attempting to connect to a computer.
To do this, select DD DRIVE from the HDD Mode screen.
This returns use of the unit to hard disk mode.
4
1
menu screen and enable
HDD Mode
.
screen and enable
HDD Mode
Slave FS-100
CONNECT
COMPUTER THEN
ENABLE BYPASS
Computer I/O
DD DRIVE
FS-100 Portable DTE Recorder
FS-100 Functions
3
DV I/O
.
55