Using The Fs-100 With A Computer - Focus FS-100 User Manual

Using the FS-100 with a Computer

Once video clips are recorded to the FS-100 it is possible to use
those clips in most computer based DV/HD NLE systems. This
section contains the following:
Initial Setup
Mounting the FS-100 in Windows
FS-100 and FAT 32
Using Avid OMF Clips
Dismounting the FS-100 (Windows)
Mounting the FS-100 (Macintosh)
Dismounting the FS-100 (Macintosh)
In the past, to get footage into an NLE system, it was necessary to
capture / digitize the footage using a video capture card. For most
DV and some P2 compatible NLE systems, FS-100 DTE functionality
eliminates the capture stage. All that is necessary is the moving of the
video files from the FS-100 to a computer.
Recording for Unsupported NLE
If a desired NLE is not supported by Focus Enhancements DTE, it is
necessary to use the AV/C control to capture the video footage for editing.
For more details refer to
Control Screen
on page 86.
FS-100 Portable DTE Recorder
92
93
95
96
99
100
101
91