Disp (Display) Information Fields - Focus FS-100 User Manual

FS-100 Functions
10.
Reel Display
In
Record
particular REEL that a clip is located in or, has been marked
to. If in
brackets for example, [REEL]. This area is blank if
has been selected.
information field that displays data type.
11.
DISP
information field that displays current data.
12.
DISP

DISP (display) Information Fields

Use the
DISP
information fields 11 and 12. The data shown depends on the
mode of operation, i.e.
Pressing the
category of information. Below is a table of the data types and
data available with
Field
Number
11
12
11
12
11
12
11
12
11
FS-100 Portable DTE Recorder
44
or modes, this item displays the
Playback
>
PLAY FROM REEL LIST
function button to display current operation
DVCPROHD
button advances the display to the next
DISP
.
DISP
Data Type /
Data Description
COUNTER
Shows frame count of current video clip during record or
playback.
REMAINING
Record: counts down number of available frames
remaining, as time, on a specific disk.
Playback: displays time remaining of the current clip.
DV (NTSC or PAL) or HD (see note following table)
Record: displays the external timecode value being
generated by a camcorder or other device during a
recording session. Timecode mode must be set to EXT TC
for this function to operate, refer to TIME CODE EXT, REC
RUN, FREE RUN, REGEN on page 61.
Playback: displays the embedded DV timecode value in a
particular track.
UB NTSC
Displays the set user bit value in a particular clip. A user
bit value must be added for this to display, refer to UB SET
on page 63.
ABSOLUTE
mode, the REEL appears in
, ,
DVCPRO50 DVCPRO/DV
NO REEL
.