Focus FS-100 User Manual page 51

Do Not Disconnect Power or FireWire Cable
Never disconnect the power or the FireWire cable during a
recording. This will cause file corruption.
Loss of Power During Recording
If power is lost during recording it is possible to repair the
damaged file or files, refer
Repair Clip
Troubleshooting: Counter Not Incrementing
If the Counter does not increment while recording from the camera, it
is an indication that there is no active connection between the FS-100
and the camera.
• Verify that the FS-100 1394 DV I/O and the camera connections
are secure. It may be necessary to unplug and then reconnect
them.
When a good connection is made, the Counter increments and
recording starts.
Verify FS-100 and Camcorder are the Same Video Standard
For example, a NTSC or PAL DV source records only on a matching
NTSC or PAL unit.
Repair Disk
on page 76.
FS-100 Portable DTE Recorder
Quickstart
on page 75 to and
33