Syncro Slave - Focus FS-100 User Manual

Syncro Slave

-SYNCRO SLAVE

This mode is for camcorders that do not have external control or
the tapeless control functionality compatible with the FS-100.
• Syncro Slave mode requires that a tape be in the camcorder
for operation.
• The FS-100 must be set to
• In this mode, the FS-100 watches the record state of the
camcorder and follows its actions.
When Synchro Slave mode is entered from the menu, the Home
screen appears with the Pause indicator displayed in the upper
left-hand corner along with a
following the camcorder's record state.
1. Verify that the FS-100 is in
2. From the FS-100 Home screen, press the
button several times until the Control screen appears:
3. Use the
Down
The dash on the left side of an item indicates it is the
current selection. The default value is
4. Press the
5. The beginning screen returns and a
appears in the upper left-hand corner. Next to this
symbol, is a
record state of the connected camcorder.
6. Now the FS-100 will record at the same time the
camcorder records to tape.
CONTROL
LOCAL
AV / C
TAPELESS
Syncro Slave
Y
navigation button to select
navigation button.
Select
indicating that FS-100 is now following the
Y
FS-100 Portable DTE Recorder
control mode.
that indicates that the FS-100 is
mode.
STOP
Right
Local
Pause
Quickstart
navigation
.
Syncro Slave
.
indicator
35