Log Files; Error Messages - Focus FS-100 User Manual

Log Files

With each recording of a particular clip on a disk, the FS-100
creates a text log file to identify information about the recorded
clip and the recording session. Information includes:
• Clip name
• Clip in/out source TC values
• Clip duration
• Clip type (record file type).
The log file also identifies when the shock cache becomes low and
when disk or other errors occur during a recording.

Error Messages

Error messages may appear on the FS-100 LCD display from time
to time. The purpose of these messages is to alert you to action that
may effect your FS-100 operation. Below is a list of error messages
and actions you can take:
Error Message
LOW BATTERY!
HIGH
TEMPERATURE!
NO SPACE LEFT!
DISK ERROR
XXX
NO DISK
DETECTED
WRONG
PRODUCT ID
FILE NOT FOUND
AUDIO MUTE
FS-100 Portable DTE Recorder
108
Description
Battery power is low.
The unit is getting too hot for
normal operation.
The Disk Drive is Full.
Lost Disk Communication.
Lost Disk Communication.
Incorrect Software Loaded.
Wrong filename or missing file. Check filename or that upgrade file
Playback of DVCPROHD 720/
24 PN content.
Action
Connect AC Power or replace the battery
pack.
Make sure the vent and fan intake holes
are clear.
Transfer files off the drive and format it
before attempting to do more recording.
Contact Focus Enhancements Technical
Support.
Contact Focus Enhancements Technical
Support.
Download correct software and perform
upgrade again.
exists.
This is normal. No action is required