Camera Firewire Connector - Focus FS-100 User Manual

Portable dte recorder
Hide thumbs Also See for FS-100:
Table of Contents

Advertisement

Quickstart

Camera FireWire Connector

• DV/I/O
• 6-pin IEEE-1394a connector
See the note
Do Not Force
• Isochronous 25Mb/s to 100Mb/s DV video I/O
FS-100 supports 1080i/720p video I/O in DVCPROHD
REC mode.
• Supported inputs for DVCPROHD / DVCPRO50 /
DVCPRO / DV:
NTSC
• 1080 60i
• 720 60P
• 480 60i
PAL
• 1080 50i
• 720 50P
• 576 50i
( )
indicates pull down format - (same stream)
**
The 720 24PN, 25PN, and 30PN recordings are supported in
• For DVCPROHD input, audio is embedded 4-ch, 48kHz,
16-bit.
• For DVCPRO50 input, audio is embedded 4-ch., 48kHz, 16-
bit.
• For DVCPRO input, audio is embedded 2-ch., 48kHz, 16-
bit,
• For DV input, audio is embedded 2-ch., 48kHz, 16-bit or 4-
ch., 32-khz, 12-bit.
4-Channel Audio
4-channel (12-bit, 32kHz) audio is available only with RawDV format.
FS-100 Portable DTE Recorder
12
Properly Align FireWire Cable and Connector -
on page 11 .
30P, 24P, 24PA
(
30P, 24P
(
30P, 24P, 24PA
(
25P
(
)
25P
(
) **
25P
(
)
version 3.0. These are generated from the 720 24P/25P/30P as an
input. The PN modes are not supported as input streams.
)
) **
)

Advertisement

Table of Contents
loading

Table of Contents