Mounting The Fs-100 (Macintosh) - Focus FS-100 User Manual

Using the FS-100 with a Computer

Mounting the FS-100 (Macintosh)

1. Start the Mac computer and connect the FS-100's
port to the computer using a standard 6-pin to 6-pin
O
FireWire cable.
When mounted, the FS-100 should appear on the computer's
desktop as shown below:
The FS-100 appears as a FAT32 volume with a PC label.
2. Locate the FS-100 on the desktop and open it up.
3. Open the folder with the most recent date code (for example,
"20050127-110345-01"). It should look similar to the following:
Before Connecting FS-100 to a Computer
If clips have been assigned to a Reel folder: perform an Organize
Reels before connecting the unit to a computer.
FS-100 Portable DTE Recorder
100
COMPUTER I/