Heat Sink
Processor
SSD *2set
Natwork Card *3
Add-On Module
DIMM *4Set
Power Cable
M.2 *2
3.3 Step-by-Step Disassembly Instructions
1. Removing Cable and Chassis Top Cover
1. Use the operating system to power down the system.
2. After the system has completely shut-down, disconnect the power cords from the power supply
modules.
3. Remove all cables/ unit from the server IO port.
1.2
1.4
1.5
1.1
1.1
1.3
4. The chassis top cover can be lifted off after pressing down on the release button and lifting the cover off.