Installing The Sun Fire E6900 System; Tools - Sun Microsystems Fire E6900 Installation Manual

2
C H A P T E R

Installing the Sun Fire E6900 System

This chapter contains procedures for moving the Sun Fire E6900 system, connecting
the cables, powering the system and installing additional hardware.
Section 2.1 "Tools" on page 2-1
I
Section 2.2 "Moving and Securing the Sun Fire E6900 System" on page 2-2
I
Section 2.3 "Connecting Power Cables to the Sun Fire E6900 System" on page 2-8
I
Section 2.4 "Connecting the I/O Assemblies" on page 2-11
I
Section 2.5 "Connecting the Administrative Console" on page 2-11
I
Section 2.6 "Powering On the Sun Fire E6900 System" on page 2-14
I
Section 2.7 "Powering Off the Sun Fire E6900 System" on page 2-16
I
Section 2.8 "Installing Additional Hardware" on page 2-17
I
Section 2.9 "Installing Peripheral Devices" on page 2-17
I
Section 2.10 "I/O Card Visibility Issues" on page 2-17
I
2.1

Tools

Leveling wrench (combination 1/2-inch and 9/16-inch wrench located in the
I
upper rear of the cabinet)
System keys (one in the front door and the second in the shipping kit)
I
2-1