Notes On Installing In The Rack; Environmental Protection - Fujitsu ETERNUS CS800 Getting Started Manual

Important Information

Notes on Installing in the Rack

V

Environmental Protection

Environmentally-friendly product design and development
This product has been designed in accordance with the Fujitsu Technology Solutions
standard for "environmentally friendly product design and development". This means that
key factors such as durability, selection and labeling of materials, emissions, packaging,
ease of dismantling and recycling have been taken into account.
This saves resources and thus reduces the harm done to the environment.
Energy-saving information
Devices that do not need to be constantly switched on should be switched off until they are
needed as well as during long breaks and after completion of work.
U41842-J-Z125-1-76
CAUTION!
For safety reasons, at least two people are required to install the rack
●
model because of its weight and size.
Never lift the devices into the rack using the handles on the front panel.
●
When connecting and disconnecting cables, observe the relevant instructions
●
in the "Important Information" chapter of the technical manual for the corre-
sponding rack. The technical manual is supplied with the corresponding rack.
When installing the rack, make sure that the anti-tilt mechanism is correctly
●
fitted.
For safety reasons, no more than one unit may be removed from the rack at any
●
one time during installation and maintenance work.
If several units are simultaneously removed from the rack, there is a risk that the
●
rack could tip over.
The rack must be connected to the power supply by an authorized specialist
●
(electrician).
If the rack model is integrated into an installation that draws power from an
●
industrial power supply network with an IEC309 type connector, the power
supply's fuse protection must comply with the requirements for non-industrial
power supply networks for the type A connector.
Notes on Installing in the Rack
21