Laser Information; Batteries - Fujitsu ETERNUS CS800 Getting Started Manual

Important Information

Laser Information

The CD/DVD drive complies with IEC 60825-1 laser class 1.
V
The FC HBAs (Fibre Channel Host Bus Adapters) also comply with IEC 60825-1 laser
class 1.
Class 1M Laser Product (PRO/10GbE SR Server Adapter)
The Laser device must be factory serviced ONLY by the responsible manufacturer! NO
adjustments, service or maintenance is to be performed otherwise.
V

Batteries

V
U41842-J-Z125-1-76
CAUTION!
The CD/DVD drive contains a light-emitting diode (LED), which under certain
circumstances produces a laser beam stronger than laser class 1. Looking directly
at this beam is dangerous.
Never remove parts of the CD/DVD drive casing!
CAUTION!
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
CAUTION!
Incorrect replacement of batteries may lead to a risk of explosion. The batteries
●
may only be replaced with identical batteries or with a type recommended by
the manufacturer (see the technical manual for the system board).
Do not throw batteries into the trash can. They must be disposed of in accor-
●
dance with local regulations concerning special waste.
The battery must be disposed of in accordance with local regulations
●
concerning special waste.
Replace the lithium battery on the system board in accordance with the instruc-
●
tions in the technical manual for the system board.
All batteries containing pollutants are marked with a symbol (a crossed-out
●
garbage can). In addition, the marking is provided with the chemical symbol of
the heavy metal decisive for the classification as a pollutant:
Cd Cadmium
Hg Mercury
Pb Lead
Safety Instructions
17