Fujitsu ETERNUS CS800 Getting Started Manual page 35

Installing an ETERNUS CS800 Rack
Figure 15: Bracket mounted in the right corner at the rear of the rack. Insert bracket in the rear left corner of the
rack, tighten the screw M5x8 and move it to the right into position. Align screw thread M8 in the anti-tilt plate with
the drill hole of the mounting bracket and tighten the screw M8x12mm . Afterwards please mount the left bracket.
Figure 16: Tighten the screws
U41842-J-Z125-1-76
Handling Instructions
35